Product ID:ANTI-CAPILLARY COMPOUND
MSDS Date:09/18/1986
FSC:3439
NIIN:00N036316
MSDS Number: BQQWD

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')

CAS: 8012-95-1

RTECS: PY8030000

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3;10 STEL

GLUCONIC ACID, MONOSODIUM SALT, D-; (INHIBITOR)

CAS: 527-07-1

RTECS: LZ5235000

SODIUM CARBONATE; (SODA ASH)

CAS: 497-19-8

RTECS: VZ4050000

HEAD W/RESPECT TO FUME PLUME, AS WELL AS PRESENCE OF

RTECS: 9999999ZZ

FROM CLEANSING & DEGREASING ACTIVITIES). WHEN

RTECS: 9999999ZZ

IN PERCENT & FORM FROM INGS. DECOMP PRODS OF NORMAL

RTECS: 9999999ZZ

MATLS SHOWN IN INGS SECTION, PLUS THOSE FROM BASE

RTECS: 9999999ZZ

FLUORIDES, COMPLEX OXIDES OF IRON,

RTECS: 9999999ZZ

OTHER METALS LISTED IN INGS SECTION. GASEOUS RXN

RTECS: 9999999ZZ

NITROGEN OXIDES MAY BE FORMED BY RADIA FROM ARC. ONE

RTECS: 9999999ZZ

TO WHICH WORKERS ARE EXPOSED IS TO TAKE AIR SAMPLE

RTECS: 9999999ZZ

FILTER LENS. PROVIDE PROT SCREENS & FLASH GOGGS,

RTECS: 9999999ZZ

THAT IS TOO DARK TO SEE WELD ZONE. THEN GO TO NEXT

RTECS: 9999999ZZ

CLAY (KAOLIN)

CAS: 1332-58-7

RTECS: GF1670500

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

ROSIN ACID

CAS: 8050-09-7

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC WELDING MAY CREATE
ONE/MORE OF FOLLOWING HEALTH HAZARDS. FUMES & GASES CAN BE
DANGEROUS TO YOUR HEALTH. ACUTE:SHORT-TERM OVEREXPOSURE TO WELDING
FUMES MAY RESULT IN DISCOMFORT SUCH AS DIZ ZINESS, NAUSEA OR
DRYNESS/IRRITATION OFNOSE, THROAT OR EYES. CHRONIC:LONG-TERM
OVEREXPOSURE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MAY LEAD TO SIDEROSIS (IRON DEPOSITS
IN LUNGS) & MAY AFFECT PULMONARY FUNCTIONS. ARC RAYS CAN INJURE
EYES & BURN SKIN. ELECTRIC SHOCK CAN KILL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:REMOVE TO WELL-VENTILATED AREA. CALL FOR MEDICAL AID. EMPLOY
FIRST-AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.
INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH W/POTABLE
WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD .
SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPKS & BRAZING FLAMES CAN
IGNITE COMBUST & FLAMMS. REFER TO ANSI Z49.1 FOR FIRE PREVENTION
DURING USE OF WELDING & ALLIED PROCS.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS &
PRECAUTIONARY LABEL ON PRODUCT. TRAIN WORKER TO KEEP HIS HEAD OUT
OF FUMES.
Other Precautions:WEAR HAND, HEAD & BODY PROTECTION WHICH HELP TO
PREVENT INJURY FROM RADIA, SPKS & ELEC SHOCK. SEE ANSI Z49.1. TRAIN
WORKER NOT TO TOUCH LIVE ELEC PARTS & TO INSULATE HIMSELF FROM WORK
& GROUND.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE OR WHERE LOC EXHST OR VENT DOES NOT KEEP EXPOS BELOW RECOM
EXPOS LIMIT.
Ventilation:USE ENOUGH GEN VENT & LOCAL EXHAUST AT ARC, OR BOTH, TO
KEEP FUMES & GASES FROM WORKER'S BREATHING ZONE & GEN AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:WEAR HELMET/USE FACE SHLD W/ (ING 14)
Other Protective Equipment:MAY INCLUDE ARM PROTECTORS, APRONS, HATS,
SHOULDER PROTECTION AS WELL AS DARK SUBSTANTIAL CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:WELDED, PROCESS, PROCS & ELECTRODES USED. OTHER CNDTNS
WHICH ALSO INFLUENCE COMPOSITION & QTY OF FUMES & GASES TO WHICH
WORKERS MAY BE EXPOS INCL:COATINGS ON METAL BEING WELDED (SUCH A S
PAINT, PLATING/GALVANIZING), NUMBER OF WELDERS & VOL OF WORK AREA,
QUALITY & AMT OF VENT, POSITION OF WELDER'S (ING 6)

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
METAL BEING (SUPDAT)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOC AL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.